Brass profiles offer significant advantages in machining by reducing swarf volume, minimizing tool wear, and shortening cycle times — delivering measurable cost savings. Custom cross-section profiles are produced according to customer specifications.
Examples of available profile types: L-profiles, channel profiles, half-round profiles, lock profiles, and custom profiles for industrial applications.
|
Technical Information
|
|||
|---|---|---|---|
|
Tolerances:
|
Determined by technical drawing
|
||
|
Length:
|
According to Customer request
|
||
|
Packaging:
|
Pvc Covered Bundles or Wooden Cases
|
||
|
Production Dimensions:
|
8-120 mm
|
||
|
Coil Weight:
|
|
||
| EN Symbol | EN No | Cu | Al | As | Fe | Mn | Ni | P | Pb | Si | Sn | Zn | Others Total |
Density g/cm³ |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CuZn39Pb3 | CW614N | min. | 57,0 | – | – | – | – | – | – | 2,2 | – | – | Remainder | – | 8,4 |
| max. | 59,0 | 0,05 | – | 0,3 | – | 0,3 | – | 3,5 | – | 0,3 | 0,2 | ||||
| CuZn40Pb2 | CW617N | min. | 57,0 | – | – | – | – | – | – | 1,6 | – | – | Remainder | – | 8,4 |
| max. | 59,0 | 0,05 | – | 0,3 | – | 0,3 | – | 2,2 | – | 0,3 | 0,2 | ||||
| CuZn36Pb2As | CW602N | min. | 61,0 | – | 0,02 | – | – | – | – | 1,7 | – | – | Remainder | – | 8,4 |
| max. | 63,0 | 0,05 | 0,15 | 0,1 | 0,1 | 0,3 | – | 2,8 | – | 0,1 | 0,2 | ||||
| CuZn36Pb3 | CW603N | min. | 60,0 | – | – | – | – | – | – | 2,5 | – | – | Remainder | – | 8,5 |
| max. | 62,0 | 0,05 | – | 0,3 | – | 0,3 | – | 3,5 | – | 0,2 | 0,2 | ||||
| CuZn37Pb2 | CW606N | min. | 61,0 | – | – | – | – | – | – | 1,6 | – | – | Remainder | – | 8,4 |
| max. | 63,0 | 0,05 | – | 0,2 | – | 0,3 | – | 2,5 | – | 0,2 | 0,2 | ||||
| CuZn38Pb1 | CW607N | min. | 60,0 | – | – | – | – | – | – | 0,8 | – | – | Remainder | – | 8,4 |
| max. | 61,0 | 0,05 | – | 0,2 | – | 0,3 | – | 1,6 | – | 0,2 | 0,2 | ||||
| CuZn39Pb2 | CW612N | min. | 59,0 | – | – | – | – | – | – | 1,6 | – | – | Remainder | – | 8,4 |
| max. | 60,0 | 0,05 | – | 0,3 | – | 0,3 | – | 2,5 | – | 0,3 | 0,2 | ||||
| CuZn40Pb2Al | CW618N | min. | 57,0 | 0,05 | – | – | – | – | – | 1,6 | – | – | Remainder | – | 8,3 |
| max. | 59,0 | 0,5 | – | 0,3 | – | 0,3 | – | 3,0 | – | 0,3 | 0,2 | ||||
| CuZn43Pb2Al | CW624N | min. | 55,0 | 0,05 | – | – | – | – | – | 1,6 | – | – | Remainder | – | 8,4 |
| max. | 57,0 | 0,5 | – | 0,3 | – | 0,3 | – | 3,0 | – | 0,3 | 0,2 | ||||
| CuZn35Pb1 | CW625N | min. | 62,0 | 0,5 | 0,02 | – | – | – | – | 1,2 | – | – | Remainder | – | 8,4 |
| max. | 64,0 | 0,7 | 0,15 | 0,3 | 0,1 | 0,2 | – | 1,6 | – | 0,3 | 0,2 | ||||
| CuZn33Pb1 | CW626N | min. | 64,0 | 0,8 | 0,02 | – | – | – | – | 1,2 | – | – | Remainder | – | 8,4 |
| max. | 66,0 | 1,0 | 0,15 | 0,3 | 0,1 | 0,2 | – | 1,7 | – | 0,3 | 0,2 | ||||
| CuZn32Pb2AsFeSi | CW709R | min. | 64,0 | – | 0,03 | 0,1 | – | – | – | 1,5 | 0,45 | – | Remainder | – | 8,4 |
| max. | 66,5 | 0,03 | 0,08 | 0,2 | – | 0,3 | – | 2,2 | 0,75 | 0,3 | 0,2 | ||||
| CuZn39AlFeMn | CW721R | min. | 57,0 | 0,3 | – | 0,2 | 0,8 | – | – | 0,8 | – | 0,2 | Remainder | – | 8,63 |
| max. | 59,0 | 1,3 | – | 1,2 | 1,8 | 0,3 | – | 1,6 | – | 1,0 | 0,3 | ||||
| CuZn35Ni3Mn2AlPb | CW710R | min. | 58,0 | 0,3 | – | – | 1,5 | 2,0 | – | 0,2 | – | – | Remainder | – | 8,3 |
| max. | 60,0 | 1,3 | – | 0,5 | 2,5 | 3,0 | – | 0,8 | 0,1 | 0,5 | 0,3 | ||||
| CuZn37Mn3Al2PbSi | CW713R | min. | 57,0 | 1,3 | – | – | 1,5 | – | – | 0,2 | 0,3 | – | Remainder | – | 8,1 |
| max. | 59,0 | 2,3 | – | 1,0 | 3,0 | 1,0 | – | 0,8 | 1,3 | 0,3 | 0,3 | ||||
| CuZn40Mn1Pb1FeSn | CW722R | min. | 56,5 | – | – | 0,2 | 0,8 | – | – | 0,8 | – | 0,2 | Remainder | – | 8,3 |
| max. | 58,5 | 0,1 | – | 1,2 | 1,8 | 0,3 | – | 1,6 | – | 1,0 | 0,3 | ||||
| CuZn36 | CW507L | min. | 63,5 | – | – | – | – | – | – | – | – | – | Remainder | – | 8,4 |
| max. | 65,5 | 0,02 | – | 0,05 | – | 0,3 | – | 0,05 | – | 0,1 | 0,1 | ||||
| CuZn37 | CW508L | min. | 62,0 | – | – | – | – | – | – | – | – | – | Remainder | – | 8,4 |
| max. | 64,0 | 0,05 | – | 0,1 | – | 0,3 | – | 0,1 | – | 0,1 | 0,1 | ||||
| CuZn40 | CW509L | min. | 59,0 | – | – | – | – | – | – | – | – | – | Remainder | – | 8,4 |
| max. | 61,5 | 0,05 | – | 0,2 | – | 0,3 | – | 0,2 | – | 0,2 | 0,2 | ||||
| CuZn42 | CW510L | min. | 57,0 | – | – | – | – | – | – | – | – | – | Remainder | – | 8,4 |
| max. | 59,0 | 0,05 | – | 0,3 | – | 0,3 | – | 0,2 | – | 0,3 | 0,2 | ||||
| CuZn42 Pb 80 ppm | CW510L Pb 80 ppm | min. | 57,0 | – | – | – | – | – | – | – | – | – | Remainder | – | 8,37 |
| max. | 59,0 | 0,05 | – | 0,1 | – | 0,1 | – | 0,008 | – | 0,1 | 0,2 | ||||
| CuZn21Si3P | CW724R | min. | 75,0 | – | – | – | – | – | 0,02 | – | 2,7 | – | Remainder | – | 8,3 |
| max. | 77,0 | 0,05 | – | 0,3 | 0,05 | 0,2 | 0,10 | 0,10 | 3,5 | 0,3 | 0,2 | ||||
| CuZn40SiSn | CF725R | min. | 58,5 | – | – | – | – | – | – | – | 0,2 | 0,2 | Remainder | – | 8,3 |
| max. | 61,5 | 0,01 | – | 0,25 | – | – | – | 0,02 | 0,4 | 0,5 | 0,2 | ||||
| CuZn40MnSi | CF726R | min. | 58,5 | – | – | – | 0,05 | – | – | – | 0,15 | – | Remainder | – | 8,3 |
| max. | 61,5 | 0,01 | – | 0,25 | 0,25 | – | – | 0,02 | 0,4 | 0,2 | 0,2 | ||||
| CuNi7Zn39Pb3Mn2 | C797 | min. | 46,0 | – | – | – | 1,0 | 6,5 | – | 1,5 | – | – | Remainder | – | 8,44 |
| max. | 48,5 | 0,05 | – | 1,0 | 2,5 | 8,5 | – | 2,5 | – | – | 0,3 | ||||
| CuZn31Si1 | CW708R | min. | 66,0 | – | – | – | – | – | – | – | 0,7 | – | Remainder | – | 8,4 |
| max. | 70,0 | – | – | 0,4 | – | 0,5 | – | 0,8 | 1,3 | 0,5 | 0,5 | ||||
| CuZn39Pb1Al | CC754S | min. | 58,0 | – | – | – | – | – | – | 0,5 | – | – | Remainder | – | 8,3 |
| max. | 63,0 | 0,8 | – | 0,7 | 0,5 | 1,0 | 0,02 | 2,5 | 0,05 | 1,0 | – | ||||
| CuZn39Pb1Al (Low Lead) | CC755S | min. | 59,5 | 0,4 | – | 0,05 | – | – | – | 1,2 | – | – | Remainder | – | 8,3 |
| max. | 61,0 | 0,7 | – | 0,2 | 0,05 | 0,2 | – | 1,7 | 0,05 | 0,35 | – |
No alloy matches your search.
EN 12167 Table 17 — Thickness and Width Tolerances for Bars
Dimensions in mm.
| Nominal Width | Width Tolerance |
Tolerance on Thickness for Range of Thickness | ||||||
|---|---|---|---|---|---|---|---|---|
| Over | Up to and including |
3 ≤ 6 | 6 < 10 | 10 < 18 | 18 < 30 | 30 < 50 | 50 ≤ 60 | |
| Class A Tolerances | ||||||||
| 6ᵃ | 18 | ±0,27 | ±0,18 | ±0,22 | ±0,27 | – | – | – |
| 18 | 30 | ±0,33 | ±0,18 | ±0,22 | ±0,27 | ±0,33 | – | – |
| 30 | 50 | ±0,62 | ±0,22 | ±0,27 | ±0,33 | ±0,45 | ±0,62 | – |
| 50 | 80 | ±1,20 | ±0,27 | ±0,33 | ±0,45 | ±0,52 | ±0,74 | ±1,00 |
| 80 | 120 | ±2,20 | ±0,33 | ±0,45 | ±0,52 | ±0,74 | ±1,00 | ±1,20 |
| Class B Tolerances | ||||||||
| 6ᵃ | 18 | ±0,15 | ±0,10 | ±0,12 | ±0,15 | – | – | – |
| 18 | 30 | ±0,22 | ±0,10 | ±0,12 | ±0,15 | ±0,22 | – | – |
| 30 | 50 | ±0,30 | ±0,13 | ±0,15 | ±0,18 | ±0,22 | ±0,30 | – |
| 50 | 80 | ±0,37 | ±0,16 | ±0,18 | ±0,22 | ±0,30 | ±0,37 | – |
| 80 | 120 | ±0,45 | ±0,18 | ±0,22 | ±0,27 | ±0,35 | ±0,45 | – |
| Class C Tolerances | ||||||||
| 6ᵃ | 18 | ±0,10 | ±0,07 | ±0,09 | ±0,10 | – | – | – |
| 18 | 30 | ±0,15 | ±0,07 | ±0,09 | ±0,10 | ±0,15 | – | – |
| 30 | 50 | ±0,20 | ±0,09 | ±0,10 | ±0,12 | ±0,15 | ±0,20 | – |
| 50 | 80 | ±0,25 | ±0,11 | ±0,12 | ±0,15 | ±0,20 | ±0,25 | – |
| 80 | 120 | ±0,30 | ±0,12 | ±0,15 | ±0,18 | ±0,23 | ±0,35 | – |
ᵃ Including 6. NOTE: Rectangular bar to class C tolerances is normally only available for the materials given in tables 1, 3 and 4.
EN 12167 Table 18 — Length Tolerances for Bars
Dimensions in mm.
| Nominal Width | Preferred (Available) Lengths | Length Tolerance | |
|---|---|---|---|
| Over | Up to and including | ||
| 6ᵃ | 18 | 3 000, 4 000 | ±50 |
| 18 | 30 | 3 000, 4 000 | ±100 |
| 30 | 50 | 2 000, 3 000, 4 000 | ±150 |
| 50 | 80 | 2 000, 3 000 | ±200 |
| 80 | 120 | 1 000, 2 000 | ±250 |
ᵃ Including 6.
EN 12167 Table 19 — Straightness Tolerance for Bars of Width 10 mm and Above
| Tolerance Class | Maximum Deviation from Straightness (see 6.5.4.2.) mm | |
|---|---|---|
| Over any 400 mm length | Over the total length L of the bar in metres (L ≥ 1 m) | |
| A | 2,4 | 6,0 × L |
| B | 1,6 | 4,0 × L |
| C | 0,8 | 2,0 × L |
Mes Metal continuously improves its service and product quality through effective use of technology, prioritizing customer satisfaction and building a strong international presence.
Operating in the copper alloys sector since 1981, Mes Metal A.Ş. is one of Turkey's leading brass rod manufacturers.
Baksav Sanayi Sitesi, Mustafa Kurdoğlu Cad. No: 22 Beylikdüzü - Istanbul TURKEY
export1@mesmetal.com