Free machining rods are manufactured in accordance with TS EN 12164 standards, offering excellent machinability for high-speed machining applications. These rods are precision-calibrated to ensure tight dimensional tolerances. Stress-relieving treatment is available upon customer request.
|
Technical Information
|
|||
|---|---|---|---|
|
Tolerances:
|
TS EN 12164 Copper and copper alloys. Rod for free machining purposes
|
||
|
Length:
|
Standart 3000 mm, up to 4000 mm
|
||
|
Packaging:
|
Pvc Covered Bundles or Wooden Cases
|
||
|
Production Dimensions:
|
3 -55 mm
|
||
|
Coil Weight:
|
|
||
| EN Symbol | EN No | Cu | Al | As | Fe | Mn | Ni | P | Pb | Si | Sn | Zn | Others Total |
Density g/cm³ |
UBA/4MS List Status |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CuZn39Pb3 | CW614N | min. | 57,0 | – | – | – | – | – | – | 2,2 | – | – | Remainder | – | 8,4 | Not listed |
| max. | 59,0 | 0,05 | – | 0,3 | – | 0,3 | – | 3,5 | – | 0,3 | 0,2 | |||||
| CuZn40Pb2 | CW617N | min. | 57,0 | – | – | – | – | – | – | 1,6 | – | – | Remainder | – | 8,4 | Not listed |
| max. | 59,0 | 0,05 | – | 0,3 | – | 0,3 | – | 2,2 | – | 0,3 | 0,2 | |||||
| CuZn36Pb2As | CW602N | min. | 61,0 | – | 0,02 | – | – | – | – | 1,7 | – | – | Remainder | – | 8,4 | Not listed |
| max. | 63,0 | 0,05 | 0,15 | 0,1 | 0,1 | 0,3 | – | 2,8 | – | 0,1 | 0,2 | |||||
| CuZn36Pb3 | CW603N | min. | 60,0 | – | – | – | – | – | – | 2,5 | – | – | Remainder | – | 8,5 | Not listed |
| max. | 62,0 | 0,05 | – | 0,3 | – | 0,3 | – | 3,5 | – | 0,2 | 0,2 | |||||
| CuZn37Pb2 | CW606N | min. | 61,0 | – | – | – | – | – | – | 1,6 | – | – | Remainder | – | 8,4 | Not listed |
| max. | 62,0 | 0,05 | – | 0,2 | – | 0,3 | – | 2,5 | – | 0,2 | 0,2 | |||||
| CuZn38Pb1 | CW607N | min. | 60,0 | – | – | – | – | – | – | 0,8 | – | – | Remainder | – | 8,4 | Not listed |
| max. | 61,0 | 0,05 | – | 0,2 | – | 0,3 | – | 1,6 | – | 0,2 | 0,2 | |||||
| CuZn40Pb1 | CW627N | min. | 57,0 | – | – | – | – | – | – | 0,8 | – | – | Remainder | – | 8,4 | Not listed |
| max. | 59,0 | 0,05 | – | 0,3 | – | 0,3 | – | 1,6 | – | 0,3 | 0,2 | |||||
| CuZn39Pb2 | CW612N | min. | 59,0 | – | – | – | – | – | – | 1,6 | – | – | Remainder | – | 8,4 | Not listed |
| max. | 60,0 | 0,05 | – | 0,3 | – | 0,3 | – | 2,5 | – | 0,3 | 0,2 | |||||
| CuZn40Pb2Al | CW618N | min. | 57,0 | 0,05 | – | – | – | – | – | 1,6 | – | – | Remainder | – | 8,3 | Not listed |
| max. | 59,0 | 0,5 | – | 0,3 | – | 0,3 | – | 3,0 | – | 0,3 | 0,2 | |||||
| CuZn43Pb2Al | CW624N | min. | 55,0 | 0,05 | – | – | – | – | – | 1,6 | – | – | Remainder | – | 8,4 | Not listed |
| max. | 57,0 | 0,5 | – | 0,3 | – | 0,3 | – | 3,0 | – | 0,3 | 0,2 | |||||
| CuZn35Pb1,5AlAs | CW625N | min. | 62,0 | 0,5 | 0,02 | – | – | – | – | 1,2 | – | – | Remainder | – | 8,4 | Valid until 11.01.2028 |
| max. | 64,0 | 0,7 | 0,15 | 0,1 | 0,1 | 0,2 | – | 1,6 | – | 0,3 | 0,2 | |||||
| CuZn33Pb1,5AlAs | CW626N | min. | 64,0 | 0,8 | 0,02 | – | – | – | – | 1,2 | – | – | Remainder | – | 8,4 | Valid until 11.01.2028 |
| max. | 66,0 | 1,0 | 0,15 | 0,1 | 0,1 | 0,2 | – | 1,7 | – | 0,3 | 0,2 | |||||
| CuZn32Pb2AsFeSi | CW709R | min. | 64,0 | – | 0,03 | 0,1 | – | – | – | 1,5 | 0,45 | – | Remainder | – | 8,4 | Not listed |
| max. | 66,5 | 0,05 | 0,08 | 0,2 | – | 0,3 | – | 2,2 | 0,8 | 0,3 | 0,2 | |||||
| CuZn40Mn1Pb1AlFeSn | CW721R | min. | 57,0 | 0,3 | – | 0,2 | 0,8 | – | – | 0,8 | – | 0,2 | Remainder | – | 8,3 | Not listed |
| max. | 59,0 | 1,3 | – | 1,2 | 1,8 | 0,3 | – | 1,6 | – | 1,0 | 0,3 | |||||
| CuZn35Ni3Mn2AlPb | CW710R | min. | 58,0 | 0,3 | – | – | 1,5 | 2,0 | – | 0,2 | – | – | Remainder | – | 8,3 | Not listed |
| max. | 60,0 | 1,3 | – | 0,5 | 2,5 | 3,0 | – | 0,8 | 0,1 | 0,5 | 0,3 | |||||
| CuZn37Mn3Al2PbSi | CW713R | min. | 57,0 | 1,3 | – | – | 1,5 | – | – | 0,2 | 0,3 | – | Remainder | – | 8,1 | Not listed |
| max. | 59,0 | 2,3 | – | 1,0 | 3,0 | 1,0 | – | 0,8 | 1,3 | 0,4 | 0,3 | |||||
| CuZn40Mn1Pb1FeSn | CW722R | min. | 56,5 | – | – | 0,2 | 0,8 | – | – | 0,8 | – | 0,2 | Remainder | – | 8,3 | Not listed |
| max. | 58,5 | 0,1 | – | 1,2 | 1,8 | 0,3 | – | 1,6 | – | 1,0 | 0,3 | |||||
| CuZn36 | CW507L | min. | 63,5 | – | – | – | – | – | – | – | – | – | Remainder | – | 8,4 | Listed |
| max. | 65,5 | 0,02 | – | 0,05 | – | 0,3 | – | 0,05 | – | 0,1 | 0,1 | |||||
| CuZn37 | CW508L | min. | 62,0 | – | – | – | – | – | – | – | – | – | Remainder | – | 8,4 | Listed |
| max. | 64,0 | 0,05 | – | 0,1 | – | 0,3 | – | 0,1 | – | 0,1 | 0,1 | |||||
| CuZn40 | CW509L | min. | 59,0 | – | – | – | – | – | – | – | – | – | Remainder | – | 8,4 | Not listed |
| max. | 61,5 | 0,05 | – | 0,2 | – | 0,3 | – | 0,2 | – | 0,2 | 0,2 | |||||
| CuZn42 | CW510L | min. | 57,0 | – | – | – | – | – | – | – | – | – | Remainder | – | 8,4 | Not listed |
| max. | 59,0 | 0,05 | – | 0,3 | – | 0,3 | – | 0,2 | – | 0,3 | 0,2 | |||||
| CuZn42 Pb 80 ppm | CW510L Pb 80 ppm | min. | 57,0 | – | – | – | – | – | – | – | – | – | Remainder | – | 8,37 | Listed |
| max. | 59,0 | 0,05 | – | 0,1 | – | 0,1 | – | 0,008 | – | 0,1 | 0,2 | |||||
| CuZn21Si3P | CW724R | min. | 75,0 | – | – | – | – | – | 0,02 | – | 2,7 | – | Remainder | – | 8,3 | Listed |
| max. | 77,0 | 0,05 | – | 0,3 | 0,05 | 0,2 | 0,10 | 0,10 | 3,5 | 0,3 | 0,2 | |||||
| CuNi7Zn39Pb3Mn2 | C797 | min. | 46,0 | – | – | – | 1,0 | 6,5 | – | 1,5 | – | – | Remainder | – | 8,44 | Not listed |
| max. | 48,5 | 0,05 | – | 1,0 | 2,5 | 8,5 | – | 2,5 | – | – | 0,3 | |||||
| CuNi7Zn39Pb3Mn2 | CW400J | min. | 47,0 | – | – | – | 1,5 | 6,0 | – | 2,3 | – | – | Remainder | – | 8,5 | Not listed |
| max. | 50,0 | – | – | 0,3 | 3,0 | 8,0 | – | 3,3 | – | 0,2 | 0,2 | |||||
| CuZn31Si1 | CW708R | min. | 66,0 | – | – | – | – | – | – | – | 0,7 | – | Remainder | – | 8,4 | Not listed |
| max. | 70,0 | – | – | 0,4 | – | 0,5 | – | 0,8 | 1,3 | 0,5 | 0,5 |
No alloy matches your search.
TS EN 12164 Table 14 — Diameter Tolerances for Round Rods
Dimensions in mm.
| Nominal Diameter | Tolerances | |||
|---|---|---|---|---|
| Over | Up to and including | Class A | Class B | Class C |
| 2ª | 3 | 0 -0,04 |
0 -0,025 |
0 -0,015 |
| 3 | 6 | 0 -0,05 |
0 -0,030 |
0 -0,020 |
| 6 | 10 | 0 -0,06 |
0 -0,036 |
0 -0,025 |
| 10 | 18 | 0 -0,07 |
0 -0,043 |
– |
| 18 | 30 | 0 -0,08 |
0 -0,052 |
– |
| 30 | 50 | 0 -0,16 |
– | – |
| 50 | 80 | 0 -0,19 |
– | – |
TS EN 12164 Table 15 — Width-Across-Flats Tolerances for Regular Polygon Section Rods
Dimensions in mm.
| Nominal Width Across Flats | Tolerances | |
|---|---|---|
| Over | Up to and including | |
| – | 3 | 0 -0,06 |
| 3 | 6 | 0 -0,08 |
| 6 | 10 | 0 -0,09 |
| 10 | 18 | 0 -0,11 |
| 18 | 30 | 0 -0,13 |
| 30 | 50 | 0 -0,16 |
| 50 | 60 | 0 -0,19 |
EN 12164 Table 16 — Straightness Tolerances for Rods
| Nominal Diameter or Width Across Flats | Maximum Deviation from Straightness (mm) | |||
|---|---|---|---|---|
| Over any 400 mm length | Over the total length L of the rod in metres (L ≥ 1 m) | |||
| For alloys in Tables 3,4,5 and 6 | For alloys in Tables 2 and 7 | For alloys in Tables 3,4,5 and 6 | For alloys in Tables 2 and 7 | |
| Round Rod | ||||
| 10 mm to 50 mm | 0,4 | 0,8 | 1,0 × L | 2,0 × L |
| Polygon Section Rod | ||||
| 10 mm to 50 mm | 0,6 | 1,2 | 1,5 × L | 3,0 × L |
EN 12164 Table 17 — Length Tolerances for Rods of Nominal Length
Dimensions in mm.
| Nominal Diameter or Width Across Flats | Preferred (Available) Lengths | Length Tolerances | |
|---|---|---|---|
| Over | Up to and including | ||
| 2ª | 30 | 3 000 or 4 000 | ±50 |
| 30 | 50 | 3 000 or 4 000 | ±100 |
| 50 | 80 | 3 000 | ±150 |
Mes Metal continuously improves its service and product quality through effective use of technology, prioritizing customer satisfaction and building a strong international presence.
Operating in the copper alloys sector since 1981, Mes Metal A.Ş. is one of Turkey's leading brass rod manufacturers.
Baksav Sanayi Sitesi, Mustafa Kurdoğlu Cad. No: 22 Beylikdüzü - Istanbul TURKEY
export1@mesmetal.com